Service Department

Feel confident that a “Full Service” performed at Bumpus Harley-Davidson® of Memphis is performed by a fully-trained and certified Harley-Davidson® Technician with the tools, parts, and the know-how to get the job done right.

• Replace engine oil, filter, drain plug o-ring. Torque drain plug to proper specification. Ensure proper oil level at operating temperature.
• Check operation of all electrical equipment, lighting and controls.
• Inspect front and rear tire tread depth and air pressure. Check tightness of all spokes (if equipped.)
• Inspect fluid level of front brake and clutch reservoirs (some models.) Check torque of cover screws.
• Check torque of switch housing screws, clutch lever handlebar clamp screws, and master cylinder handlebar screws.
• Check engine coolant freeze point and inspect for leaks. Clean radiators (some models.)
• Drain and replace primary chaincase lubricant and drain plug and o-ring.
• Drain and replace transmission lubricant and drain plug o-ring
• Check torque of right front engine mount end cap screws and engine mount to front crankcase screws
• Inspect oil, brake, and fuel lines and fittings for leaks, contact, or abrasions
• Inspect rear brake reservoir for proper level. Check torque of cover screws.
• Inspect front brake pads and discs. Ensure pad thickness is within specification.
• Inspect rear brake pads and disc. Ensure pad thickness is within specification.
• Check torque of front and rear axle nut.
• Inspect and lubricate jiffy stand.
• Lubricate clutch cable. Ensure proper cable adjustment and hand lever free play.
• Check, adjust, and lubricate brake and clutch controls.
• Inspect and adjust drive belt. Inspect wheel sprocket.
• Check rear air suspension pressure (some models), operation, and leakage.
• Inspect exhaust system for leaks, cracks, and loose or missing fasteners or exhaust shields.
• Check battery, clean connections and torque terminal screws.
• Lubricate the fuel door. Tour-Pak, and saddlebag hinges and latches (some models.)
• Check for open recalls, product campaigns, trouble codes, and engine management system updates.
• Road test – verify component and system functions.
• Includes our signature “Basic Wash” at no additional charge.